How Korean blinds work
The fabric is woven in alternating horizontal bands: one sheer, one solid, repeating down the length of the blind. Two layers of this fabric sit on a single roller, one behind the other.
Roll the blind slightly and the two layers shift relative to each other. When solid sits behind solid, the window is closed out. When solid sits behind sheer, light passes through a soft striped filter. You are not choosing between open and shut — you are moving continuously between them with one chain.
That is the whole appeal, and it is why they have taken over HDB bedrooms and living rooms: a roller blind is open or closed, a curtain is drawn or not, and a Korean blind is anywhere in between.
Korean, zebra or combi — which name is correct?
All three. The product is identical; only the name changes depending on who is selling it.
| Name |
Where it comes from |
| Korean blinds | The design originated in South Korea, and the term is the most common one in Singapore |
| Zebra blinds | Describes the striped appearance when the sheer and solid bands are offset |
| Combi blinds | Short for combination — it combines a roller blind and a sheer in one unit |
If you have been quoted for zebra blinds elsewhere and are comparing against Korean blinds here, you are comparing the same product. Judge it on fabric quality, opacity and installation instead of the label.
Which variant suits which room
| Variant |
Best for |
Why |
| Korean Blinds | Living rooms, dining areas | The standard dual-layer, full range of light control |
| Premium Korean Blinds | Main living spaces, feature windows | Heavier fabric with a better drape and finish |
| Blackout Korean Blinds | Bedrooms, especially west-facing | Solid bands block light fully when aligned |
| Privacy Korean Blinds | Ground floor, facing a corridor or another block | Denser sheer — daylight in, sightlines out |
| 3 Tones Gradient | Feature windows, open-plan rooms | Graduated colour across the fabric |
The one thing to know about privacy at night
Korean blinds behave differently after dark, and this catches people out. During the day the sheer bands let you see out while people outside see very little. At night, with the lights on inside, that reverses — the sheer bands become see-through from the outside.
For a bedroom or any ground-floor room, align the solid bands at night, or choose the blackout or privacy variant where that matters most. It is not a flaw in the product, it is how light works, and any supplier who does not mention it is not being straight with you.
Measuring and installation
Korean blinds can be mounted inside the window recess for a flush look, or outside it to cover the frame and block more edge light. Which one works depends on your window depth — and in newer BTO flats, on whether a window grille leaves enough clearance for the roller.
Older resale flats bring the opposite problem: aircon trunking or electrical conduit running above the window often eats the space a ceiling-mounted bracket needs.
We measure on site before quoting, which is the point at which either of those gets discovered. Guessing dimensions from a photo is how blinds end up 2cm short.
See the fabrics in daylight
Opacity is almost impossible to judge from a screen. Two blinds that photograph identically can let through noticeably different amounts of light, and the difference matters most in the room where you sleep.
Come to the showroom at 33 Ubi Ave 3, Vertex, #01-16, open daily 11am–8pm, and hold them against each other.
Send us your window measurements and which rooms they are for and we will tell you which variant suits each one.
Frequently asked questions
What is the difference between Korean blinds, zebra blinds and combi blinds?
Nothing — they are three names for the same product. Alternating sheer and solid fabric bands on a dual-layer roller. Korean refers to where the design originated, zebra to the striped look, combi to the fact that it combines a roller blind and a sheer in one unit.
Do Korean blinds give privacy at night?
Only with the solid bands aligned. During the day the sheer bands let you see out while blocking most of the view in. At night, with interior lights on, that reverses and the sheer bands become see-through from outside. Align the solid bands, or choose the blackout or privacy variant for bedrooms.
Are Korean blinds suitable for HDB windows?
Yes, and they are among the most common choices in HDB flats. The thing to check is clearance: window grilles in newer BTO flats and aircon trunking above windows in older resale flats can both limit where the roller mounts. We measure on site before quoting for exactly that reason.
Can Korean blinds block out light completely?
The blackout variant does, with the solid bands aligned. Standard Korean blinds filter light rather than eliminating it. Some light will always enter at the edges unless the blind is mounted outside the recess and overlaps the frame.
How do you clean Korean blinds?
Dust them with a soft brush or a vacuum on low suction, working across the bands rather than along them. Spot-clean marks with a barely damp cloth and let the fabric dry fully before rolling it up. Do not soak the fabric.
Korean blinds or curtains?
Korean blinds for precise light control in a shallow space, curtains for softness, insulation and full blackout across a wide window. Many Singapore homes use blinds in bedrooms and the study, and curtains in the living room.